Menu
ADJUSTABLE SCREW JACKS
ADJUSTABLE SOLID BASE JACK
Electro Galvanised
Used for levelling your scaffold structure, the adjustable solid base jack has a 34mm diameter x 650mm long threaded bar with Cast nut it has an adjustment capability of 500mm. Designed to fit inside a Standard / Vertical pole to support the load from a standard is 150mm square x 8.0mm thick base plate.
Other Special sizes can be made to order. Minimum order quantities are required for custom made Base Jacks.
Size 34mm Dia x 650mm long
Weight 6.0kg
Other Special sizes can be made to order. Minimum order quantities are required for custom made Base Jacks.
Size 34mm Dia x 650mm long
Weight 6.0kg
ADJUSTABLE SOLID SWIVEL JACK
Electro Galvanised
Used for levelling your scaffold structure, the adjustable solid base jack has a 34mm diameter x 650mm long threaded bar with Cast nut it has an adjustment capability of 500mm. Designed to fit inside a Standard / Vertical pole to support the load from a standard is 150mm square x 8.0mm thick base plate.
A Swivel Jack will have a pivot point at the base of the upright to allow for levelling on uneven ground.
Size 34mm Dia x 650mm long
Weight 6.9kg
A Swivel Jack will have a pivot point at the base of the upright to allow for levelling on uneven ground.
Size 34mm Dia x 650mm long
Weight 6.9kg
ADJUSTABLE SOLID U HEAD JACK
Electro Galvanised
An adjustable solid U head jack comes with a solid stem of 34mm diameter and 650mm long. It has an adjustment of 500mm. It is utilised to support and locate a Standard or Vertical Pole over a bearer.
U head Jacks can be made to order but minimum quantities will apply.
8.9kg
Galvanised
U head Jacks can be made to order but minimum quantities will apply.
8.9kg
Galvanised
ADJUSTABLE SCREW JACKS
Plain Base Plates
A Base Plate is required to support the scaffold structure. Our base plate is 8.0mm thick x 150mm square, welded with a spigot of 100mm long. This will help distribute the load of your scaffold.
1.8kg
1.8kg
