KWIKSTAGE SCAFFOLD ACCESSORIES

OPEN END STANDARDS

Open-ended standards allow for the use of a U-shaped head or base jack. These standards are utilised for the shoring of scaffold. These are used for the vertical structure of your scaffold.
These can be ordered in High-Tensile steel if you require a higher load rating.
Size 3.0m / Weight 15kg
Size 2.5m / Weight 13.8kg
Size 2.0m / Weight 11kg
Size 1.5m / Weight 9kg
Size 1.0m / Weight 5.80kg
Size 0.5m / Weight 4kg

INTERMEDIATE STANDARD

An Intermediate Standard sits halfway along your bay to allow access to a separate section of access stairs. They also allow the use of swing gates.
Size 2m Weight 12kgBR> Size 1m Weight 6kg

EDGE PROTECTION STANDARDS

These Standards are great to be used on concrete slabs for edge protection and for creating handrails by utilising ledgers.
Size 1.2m / Weight 9.20kg

HANDRAIL POSTS

Handrail posts can be secured directly to concrete to form a secure base for horizontal hand rails. This a quick and effective solution to drop-offs on the work site where pedestrian access is necessary. Horizontal members are connected by using tube and fittings.
Size 1.2m / Weight 6kg

CUSTOM MADE HOP-UP BRACKETS

Hop-ups or stage board brackets are used to give you an extra work platform. Normally located on the inside face of the scaffold these come in 1, 2 and 3 board sizes. These can be made with the following inclusions: Spigots - Used for adding a Standard and running a handrail the length of the bay and back to the main bay. Couplers - Allow you to attach to Ledgers to create access around a structure.
Size 3 Board Bracket with Spigot Weight 12.0kgBR> Size 2 Board Bracket with Spigot Weight 7.30kg
Size 1 Board Bracket with Spigot Weight 4.42kg
Size 3 Board Bracket with Coupler Weight 12.1kg
Size 2 Board Bracket with Coupler Weight 7.5kg
Size I Board Bracket with Coupler Weight 2.50kg
Size 2 Board Bracket with Spigot & Coupler Weight 8kg

TOE BOARD BRACKETS

A toe board is used for kick protection on the scaffold platform. It sits approximately 150mm above the deck level and holds a kickboard securely in place.
0.85kg

END TOE BOARD BRACKETS

CC COUPLER

CC Couplers join 2 standards together for further strength and stability on hoardings.
Weight 1.5kg

DOUBLE STEP DOWN BRACKETS

Our double step-down bracket creates a double step. Mostly used on stair access.
Galvanised Weight 6.50kg
New Design Weight 8.50kg
Double Step Down Bracket 6.50kg

STEP UP / DOWN BRACKET

Utilised for creating a single half step. Mostly used on stair access.
Weight 4.2kg

WALL TIE BRACKETS

Wall tie brackets are used for tying the main scaffold structure to a wall. They come with one Scaffold half coupler. Two half-couplers are also available
Size 100 x 250mm Weight 2.8kg

LADDER ACCESS TRANSOMS

To render access to the scaffold platform through ladders, ladder access transoms are used. The coupler links to one ledger (horizontal brace) and the "C" leans on the opposite ledger. Planks are then laid across to the transom section to create an access hole.
Size 2.4m Weight 16.5kg
Size 1.8m Weight 13.2kg
Size 1.2m Weight 7.5kg
Size 0.7m Weight 5.3kg

CORNER PANEL

A corner panel, or cover bracket is used as a gap filler between hop up brackets They feature a 90mm high upstand welded externally to one corner to accept a half fitting, which provides a positive fixture to the standard.
3x3 Corner Panel Weight 12.50kg
3x2 Interchangeable Corner PanelWeight 11kg
3x1 Interchangeable Corner Panel Weight 9.5kg
2x2 Corner Panel Weight 10kg
2x1 Interchangeable Corner Panel Weight 7.20kg
1x1 Corner Panel Weight 4kg

LADDER BRACKETS

Ladder brackets will allow for a permanent and secure anchor point for ladders so that working at height becomes safer and more accessible. These highly visible brackets will ensure a secure entry point to upper decks and provide roof access.
Weight 4.5kg

HOARDING / LEDGER TRUSS

Hoarding Transoms / Ledger Trusses create overhead protection for pedestrians. They are utilised to construct secure walkways in pedestrian areas. Site sheds can be stored on top of these.
Size 2.4m Weight 42kg
Size 1.8m Weight 31.5kg
Size 1.2m Weight 19kg

LADDER ACCESS HATCH DOOR

The ladder access hatch door is fitted at the end of a platform where access is needed to the upper or lower levels
Size 0.8 x 0.6m Weight 9.8kg

SWING GATES

Swing gates can be placed at ends of work platforms to allow easy access, but also to secure the scaffold when not needed.
Size 0.9 x 0.9m Weight 11.5kg

END BAY FOR SWING GATES

An end bay creates an extension of the swing gate.
Weight 8.9kg

SOCKET BASE WALL TIE PLATE

These allow you to tie the main scaffold off to a solid structure. This is an additional form of a wall tie.
Weight 1.75kg

GINNY WHEELS

A ginny wheel is ideal for lifting small loads to work areas.
Size 200mm Weight 4.5kg

CASTOR WHEELS

Castor wheels are secured to the bottom of a mobile scaffold for movability.
Size 200 X 50 mm Weight 6kg

COUNTER WEIGHT

Counter weights allow you to counter balance a scaffold to offset the weight on one end. They come in various sizes and can be helpful in making sure your scaffold is safe and secure hen one side is heavier than the other.
Weight 20kg

SCAFFOLDING TAG BOX WITH INSERTS

Our Scaffolding box includes 10 holders, 20 inserts and 2 pens to ensure your workforce can sign off on all Scaffolding jobs.
Weight 2.5kg

CASTOR WHEELS

Castor wheels are secured to the bottom of a mobile scaffold for movability.
Size 200 X 50 mm Weight 6kg