STEEL PLANKS, INFILL PLANKS, LAP PLATES & BOARD RESTRAINTS

STEEL PLANK

Galvanised

Steel planks or battens are a lightweight and non-slip work surface. Made from a continuous pre-galvanised steel sheet, they are pressed to a hollow shape. They can either be purchased with plain ends or custom stamped. This will provide a flush working deck which will easily support the 675kg maximum weight allowance.
Size 3.0m Weight 19.50kg
Size 2.4m Weight 14.1kg
Size 1.8m Weight 11.6kg
Size 1.2m Weight 8.1kg
Size 0.7m Weight 5.2kg

INFILL PLANK

(Half Plank 150mm wide)

Made From Pre Galvanised steel sheet pressed to a hollow shape 150mm wide. Steel boards / Planks combine lightweight construction with the strength to support the maximum weight. They fit neatly into the inverted “T” seat of a transom providing a completely flush working deck with a capacity well in excess of the greatest allowable bay loading which is 675 kgs.
Size 3.0m x 150mm Weight 16.50kg
Size 2.4m x 150mm Wide Weight 13.20kg
Size 1.8m x 150mm Wide Weight 10kg
Size 1.2m x 150mm Wide Weight 7kg
Size 0.7m x 150mm Wide Weight 5kg
Other sizes available are : 0.560m, 0.8m, 1.0m, 1.1m, and 1.5m. Also available in 50mm wide.

LAP PANELS

Kwikstage scaffold lap panels are a multi-purpose platform that is used to span a small gap between scaffolding work platforms.
Size 0.7m Long x 0.7m Wide (Three Board Wide) Weight 9.5kg
Size 0.7m Long x 0.5m Wide (Two Board Wide) Weight 7.5kg
Size 0.7m Long x 0.25m Wide (One Board Wide) Weight 5.5kg

KICK PLANK

Kick planks are a great way to stop tools and other materials being accidentally kicked off of a work platform.
Size 2.4m Weight 10.50kg
Size 1.8m Weight 8.00kg
Size 1.2m Weight 6.00kg
Size 0.7m Weight 4.50kg